Sealed to limit leaks
MaxSeal™ Technology; whole unit tested to ASTM F3150-181
From making the bed to your dog jumping on it, to lighting a candle at night or leaving a window open, each decision puts particles back into your air. Eleva™ 300X is designed to continuously filter that air all night long.
1 Dust, sensedAirSight® Plus 2.0 detects the change in particle levels as dust lifts off the sheets.
2 Dander, capturedAuto Mode increases fan speed to quickly pull dander through the HEPA filter.
3 Smoke, detectedThe 3-channel sensor detects even PM1.0, the finest particles a candle adds.
4 Pollen, clearedThe HEPA filter captures pollen that drifts in. As levels drop, Auto Mode decreases fan speed.
The hero feature
A HEPA rating usually describes the filter on its own. Eleva™ 300X is built with MaxSeal™ Technology, a sealed design that helps air flow through the filter, not around it. Instead of testing only the filter, the assembled purifier is tested as a whole to ASTM F3150-18 standards.1
Eleva™ 300X
99.97%
Whole unit tested1
Captures 99.97% of particles down to 0.3 microns, measured as a complete, sealed system: what comes out of the purifier, not just what the filter can catch.
SealedA sealed design routes room air into the filter. Few brands test for this, so look for product details that include testing information.
Un-SealedThe filter may be effective, but gaps in its design can allow some dust to escape back into the room’s air.
Most HEPA ratings test the filter alone. Eleva 300X is tested with the whole unit assembled.
The ring light
The ring around the display changes color with the sensor’s particle readings, so you can check the air level from across the room. As Auto Mode works and levels drop, it shifts back.
Good. Back to a quiet hush.
The free VeSync app shows your overnight air quality and provides insights.
DuoShield™ filtration
Particles and odors need different materials. DuoShield™ pairs a HEPA Filter for airborne particles with a separate Activated Carbon Filter for odors and some household gases.
How activated carbon works: it’s full of tiny pores that hold on to odor and gas molecules as air passes through. Because the two are separate, you replace the carbon on its own and the HEPA keeps going.
GoodEssentialEveryday freshening and light household odors.Up to 6 months · $19.99
BetterSmoke & CookingKitchens, cooking smells and lingering smoke odors.Up to 12 months · $29.99
BetterPetHomes with cats or dogs: pet odors and litter box smells.Up to 12 months · $29.99
BestPremiumNew furniture, paint or a renovation, and the strongest odor control.Up to 12 months · $34.99All four fit Eleva 300X, so you can switch when your home changes.8
Independent certification
The European Centre for Allergy Research Foundation awards its Seal of Quality to products that pass its testing and review. Eleva™ 300X carries the seal.5
MaxSeal™ Technology; whole unit tested to ASTM F3150-181
AHAM Verifide CADR 161, 250 sq ft2
DuoShield™: HEPA Filter and Activated Carbon Filter4
20dB Sleep Mode with display fully off
VeSync app: Overnight Air Report, Morning Check-In
AirSight Plus 2.0 three-channel sensor and Auto Mode3
Would it fit my room?
Pick your room type and we’ll point you to the best Eleva for you.
Which room is it for?
Rated for up to 250 sq ft at 4.8 air changes an hour, the rate AHAM’s sizing guideline uses, and up to 1,200 sq ft at 1 air change an hour, a lighter refresh for big open spaces.2
Eleva 300X next to Levoit Core 300S-P, spec for spec.
Once you see how bad your air is when sleeping you will buy this and sleep much better.
This is my 3rd Levoit air purifier, and the Eleva 300X is by far my favorite. Overall, I’m really impressed with this purifier and highly recommend the Eleva 300X!
Omg, very simple to setup. Runs automatically, measures air quality. Love seeing the blue ring light up when my air is clean.